Nissin Di622 MkII Key Features
HIGH POWER
G.No.62m (ISO 200) is obtained at the reflector position of 105mm focal length.
BOUNCE FLASH
Bounce and Swivel head for 90 degrees upward and 270 degrees horizontally. The flash head also stores a small reflection panel for fill-in shots.
TTL FLASH
Di622 MARK II is compatible with Sony's ADI system.
WIRELESS REMOTE FLASH
Slave Digital (SD): Di622 Mark II synchronizes to pre-flash systems.
Slave Film (SF): Di622 Mark II synchronizes to traditional single flash systems.
Wireless TTL: Di622 Mark II synchronizes to wireless remote flash systems. The master flash is to be set at Channel 1 group A in wireless remote mode.
TTL FLASH LEVEL COMPENSATION
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.
NISSIN ORIGINAL “MY TTL” SETTING
The TTL flash power level is pre-set for exposure at factory. You can, however, reset the TTL to the desired exposure level, in +/- 0.75 Ev. by 0.25 Ev increments.
Specifications:
- Guide Number: 44m, 145ft. (ISO 100), 62m, 205ft. (ISO 200)
- Illumination coverage: 24-105mm (16mm wide angle diffuser)
- Turning head: 90 degree upward, 90 degree to left, 180 degree to right
- Power source: 4 X AA or equivalent Mi-MH, lithium
- Recycling time: 5 sec., with fresh alkaline batteries
- Flash exposure control: ADI for Sony cameras.
- Manual(Variable power): 6 levels : Full - 1/2 - 1/4 - 1/8 - 1/16 - 1/32 powers
- Wireless mode: SD: Slave Digital (with 6 levels), SF: Slave Film (with 6 levels), Wireless TTL remote Channel 1 Group A (Controlled by master flash)
- Flash Power Lock: FE lock (for Canon)
- Dimensions: 77(W) x 130(D) x103(H) mm / 30(W) x 51(D) x 40(H) inches
- Weight: 315g (without battery) / 11oz