DJI Spreading Wings S1000+ Plus Octocopter Drone with A2 Flight Controller and Z15 GH4 Gimbal

Discontinued

Buy Now Pay Later
19.9% Representative

Credit subject to application and status

Back to top
The DJI Spreading Wings S1000+ is a professional-level Octocopter Drone with A2 Flight Controller and Z15-GH4 Gimbal head that allows you to you to capture beautiful aerial footage for all of your high-level projects. The Z15-GH4 (HD) gimbal was built specifically to hold the Panasonic GH4 compact system camera, giving you stable footage and precise control within ±0.02°. When used with a professional DJI flight system, it keeps your GH4 secure, steady and under control in even the most difficult of flight conditions. Flight time is approximately 15 minutes. Recommended for ages 18+.

S1000+ Plus Octocopter: Key Features

  • Remote control Octocoptor
  • Designed for professional videographers/photographers
  • Capture stunning aerial footage
  • Z15 3-axis Gimbal for GH3/GH4
  • 15 minute flight time
  • Large Carrying Capacity, Strong and Stable
  • Highly Portable, with Foldable Arms
  • New Power Distribution System
  • Removable Upper Center Board
  • Sparkproof Plug
  • Wide Range of Shooting Angles
  • Retractable Landing Gear
  • Reduced Vibrations, Clearer Footage
  • Innovative Arm Design

Large Carrying Capacity, Strong and Stable
Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+’s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You’re flying in a variety of flight conditions with confidence, knowing your gear is safe.

Highly Portable, with Foldable Arms
With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.

Removable Upper Center Board
The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before. This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.

New Power Distribution System
A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.

Sparkproof Plug
Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.

Professional Quality
Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.*
*Maximum flight time is tested on a windless day with a payload of 9.5kg, hovering at a height of 2 meters.

Wide Range of Shooting Angles
Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.

Compatible with Zenmuse Gimbals
Full compatibility with DJI’s entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.

Reduced Vibrations, Clearer Footage
The S1000+’s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.

Greater Power
A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg. Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.

Innovative Arm Design
Each arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.

Z15 GH4 Gimbal: Key Features

  • Another Evolutionary 3-axis Professional HD Gimbal
  • Built for the Panasonic GH4/GH3
  • HDMI-HD/AV Module
  • 3-axis Rotation Control
  • A Total Solution
  • Multiple Control Modes
  • Gimbal Servo Drive Module
  • Built-In Independent IMU Module

Built for the Panasonic GH4/GH3
Each Zenmuse is guaranteed to deliver nothing short of the best in camera control and stabilization. The Zenmuse Z15-GH4 (HD) is built specifically for the the Panasonic GH4 and GH3, so either camera fits perfectly in the gimbal. The Panasonic GH4 is known for its digital film quality images and small body, making it ideal for aerial cinematography and photography. The Zenmuse Z15-GH4 (HD) gimbal connects with your GH4 through a standard HDMI cable, but if you are using a Panasonic GH3 with the gimbal, please use the included GH3 HDMI cable.

Another Evolutionary 3-axis Professional HD Gimbal
The DJI Zenmuse Z15-GH4 (HD) gimbal, an upgraded version of the popular Zenmuse Z15-GH3, represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°. When used with a DJI professional aerial system, your Panasonic GH4/GH3 remains stable and under control even in strong winds and during intense maneuvers.

New HDMI-AV/HD Module
Get real-time HD video while controlling the camera with a built-in video output module that is perfectly compatible with the DJI Lightbridge HD digital video downlink. First-person-view flying is available in both HD and AV, and the AV output works with any 5.8G analog video downlink.

3-Axis Rotation Control
The 3-axis Zenmuse system’s creative mechanical design makes control both intuitive and easy. A tail potentiometer greatly increases stability and precision, while internal slip rings replace complicated wiring. All power and signal lines have been integrated into gimbal itself, resulting in a completely free control axis that offers a maximum yaw of ±360°, pitch of -120° to +15°, and a roll of ±25°.

Multiple Control Modes
Three control modes expand your creative boundaries and ensure ease of flight. Orientation-locked, Non Orientation-locked, and Back to Mid-point modes can be switched to on the fly, easily adjusting to the needs of each shoot.

Gimbal Servo Drive Module
Every Zenmuse gimbal gets its precision from DJI’s custom designed Gimbal Servo Drive Module. Each module is tailored to the weight and balance of the specific camera the gimbal has been designed to hold. This significantly improves control and stability while maximizing torque and minimizing vibrations.

Built-In Independent IMU Module and Infrared Module
A new stabilizing algorithm has been utilized, which together with the extremely precise machinery gives you effortless control. Because the IMU is built in, your gimbal requires no extra equipment or wiring, reducing weight and allowing you to start shooting faster. The shutter can be controlled remotely by an infrared receiver.

DJI - S1000+ Installation Demonstration



Back to top

Product Specification

Battery Model LiPo (6S,10000mAh~20000mAh,15C(Min)) - NOT INCLUDED
Camera Included No
Controller Included No
Gimbal Compatibility Panasonic GH4 & GH3
Gimbal Included Yes
Gimbal Model Zenmuse Z15-GH4
Included Accessories S1000+ Plus Kit, A2 Flight Controller, Zenmuse Z-15-GH4 Gimbal
Weight (g) 5700
Manufacturer Link DJI
Back to top
Back to top
Back to top

Buy now pay later

Buy Now Pay Later

With our no deposit Buy Now Pay Later option, pay nothing for six months when you spend £250 or more, then either settle the cash price in full by paying a £29.00 settlement fee, or choose to spread the cost over 36 months at 19.9% APR Representative. Please see the repayment example below to see how much purchasing this item on finance would cost.

Finance Example
Item Value (Cash Price) £3,498.00
Deposit £0.00
Agreement Duration 42 Months
Total Amount Credit £3,498.00
Settlement Fee £29.00
Settlement Payment -
Monthly Instalments 35 x £136.94
Final Instalments £136.87
Total Amount Payable £4,929.77
Annual Rate of Interest 19.9% P.A.
Representative APR 19.9% APR

Are you eligible for finance?

Applicants must be:

  • Aged 18 years or older from the application date
  • In permanent UK residence for a minimum of three years
  • Fulfil at least one of the following employment criteria:
    • In regular, permanent employment.
    • Retired from regular employment - With a minimum age of 50.
    • Not working through disability.
    • Self-employed.

Note: All applicants will be subject to a credit reference check by the lender.

Credit is subject to application and status. Warehouse Express Ltd trading as Wex Photographic act as credit broker and not the lender. Barclays Partner Finance act as the lender.

Can I repay early? If so how?

No repayments are scheduled in the initial six-month deferral period. However, it is possible to pay off the loan, either by way of a lump sum or in smaller amounts. If the loan is fully repaid within the six-month deferral period, then no interest is payable, but a £29.00 early-settlement will be incurred. Such repayments may be made to Barclays Partner Finance by cheque, debit card or standing order. Unfortunately it is not possible to set up a direct debit within the deferral period. Further information on how to make such repayments will be set out in the loan agreement pack provided by Barclays Partner Finance.

What happens if I don't repay within the first six months (deferral period)?

Following the six month deferral period, Barclays Partner Finance will initiate a monthly direct debit payment for the remaining duration of the loan. Interest will be charged at a rate of 19.9% APR on outstanding balances (backdated to the first date of the loan). Late payment penalties and early repayment charges will apply from this point. Barclays Partner Finance will send a reminder letter approximately one month before the six month deferral period is due to elapse. Note: If you chose to spread the cost and pay monthly, interest is charged from the start of the loan, not from the start of the repayment period.

What will I receive from the finance provider (lender)?

Barclays Partner Finance will send a loan agreement pack approximately four weeks after delivery of the goods, confirming that the account has been activated and, from this point, it is possible to make repayments against the loan.

For further information on how our finance product work, see our Finance help section.

To apply for finance, follow these three easy steps

Add items to checkout

1. Add items to your basket, and click 'Checkout'.

Apply for Barclays finance

2. When selecting your Payment Option, choose ‘Apply for Finance’, and select your offer and terms.

Complete the online form

3. Complete the Barclays Online Application form. Make sure you have your bank details at hand.

Once your application has been accepted, usually within minutes, we will immediately dispatch your equipment.

Back to top
Back to top
Product Code: 1567904-wex Manufacturers Part Number: Got a question? Get it answered...