The Interfit Dynamic Ti Trigger is designed to operate with the Interfit EX Ti heads, bringing lighting control to your camera and allowing you to tune and manage up to 7 heads from up to 12m away.
The Interfit Dynamic Ti Trigger
Each head slaved to the Ti Trigger can be assigned an ID Number 1 though to 7, which allows the Dynamic Trigger to be able to adjust the features of each head separately from any the other EX Ti heads being used in the same room up to 12 meters away from the trigger. If you assigned a head to channel 1 and another head to channel 2 you can individually adjust each heads power functions and fire the head via the Dynamic Ti Trigger by setting its corresponding channel number on the trigger.
When used with the Sync cells turned off, complete control is offered via radio signals only. Once you have set up the controls and the lighting the way you want them to operate, simply press the top left button on the Dynamic Ti Trigger though to channel 8, this allows all heads to fires in sync. Should you have more than one head set on a single channel you can adjust and fire them in sync via the Dynamic Ti Trigger.
The Dynamic Ti Trigger allows the user to:
Back to top
- Control main functions from the camera position
- Adjust power settings on the EX Ti 400 Modelling Lamp.
- On / Off / Proportional mode
- Up to 12 Meters remote range
- Adjust flash output power
Back to top
|Maximum Working Distance
||8 x 2 x 6cm
Flash sync speed