Product Code: 1541674

Used Metz 15 MS-1 Wireless Digital Macro Flash

Discontinued
Condition : 9

Very little signs of use with no more than a few cosmetic marks on the screen, base or rubbers. Lenses may show some light wear.

Condition : 9

Excellent condition. Flash unit shows little signs of use. Overall the flash unit is in excellent comsetic condition however it does exhibit marks to the area surrounding the control buttons. All other areas of the unit are in excellent condition. Fully checked and tested. Boxed Complete

With the Metz mecablitz 15 MS-1 digital it is easy to create effective highlights with any subject thanks to the individually adjustable reflectors (0°- 20°) and the associated finely calibrated light-distribution. The Metz mecablitz 15 MS-1 digital automatically adjusts its output by means of wireless TTL*, making it reliable and precise. There is also a clear, dot-matrix display, which makes ...

Back to top
With the Metz mecablitz 15 MS-1 digital it is easy to create effective highlights with any subject thanks to the individually adjustable reflectors (0°- 20°) and the associated finely calibrated light-distribution. The Metz mecablitz 15 MS-1 digital automatically adjusts its output by means of wireless TTL*, making it reliable and precise. There is also a clear, dot-matrix display, which makes the mecablitz 15 MS-1 digital even easier to use. For greater creativity you can use the manual control facility of the new mecablitz 15 MS-1 to vary the amount of light given off, with six levels of light output. The Metz 15 MS-1 digital is suitable for most camera manufacturers – even if the camera does not have a built-in flash, because the manual mode can also be used by means of the sync cable.* For TTL operation in the remote mode, you need a master flash unit.

The Metz macro flash is attached directly onto the lens, thus enabling precise and creative lighting in the macro range. In addition to which the Metz mecablitz 15 MS-1 digital can also be used in its slave function for effectively brightening up dark areas of the picture.

Flash output
  • max. GN of 15 for ISO 100/21° and 50 mm
  • High number of flashes (e.g. 200 full flashes with NiMH batteries, 1000 mAh)
  • Flash recycle time 0.3 – 5 secs (depending on the energy source and flash output)
Basic configuration
  • Wireless TTL flash control
  • Two reflector system, individually pivoting (0°, 10°, 20°) and separately controlled
  • Ratio function (light distribution from left to right
  • Horizontal (20°) pivoting reflector
  • Dot matrix display
  • Standard 50 mm illumination
  • Enclosed bouncer disc for softer illumination
  • Adjustable light (modelling light)
  • Integrated autofocus auxiliary light
  • Flash standby and exposure control indicator on flash unit
Basic flash functions
  • TTL remote flash operating mode (as slave unit)
  • Slave flash mode with pre-flash suppression
  • Slave flash mode with learn function
  • Manual flash mode with 6 partial lighting levels
  • 1st and 2nd shutter curtain synchronisation
Operates as remote TTL slave flash unit in the following operating modes:
  • E-TTL – remote flash mode (Canon)
  • i-TTL- remote flash mode (Nikon / Fujifilm)
  • P-TTL remote flash mode (Pentax / Samsung)
  • Four-Thirds TTL remote flash mode (Olympus / Panasonic / Leica)
  • ADI remote flash mode (Sony Alpha)
Prepared for the future
  • Firmware update via integrated USB port possible
  • Additional adapter rings available for 62, 67 and 72 mm
Power sources
  • AAA alkaline magnesium batteries
  • AAA lithium batteries
  • AAA NC or NiMH rechargeable batteries
Back to top

Product Specification

Flash Metering TTL (depending on camera system) and Manual
Included Accessories 52,58,55MM Adaptor rings, Box, Manual, Case
Power Source 2 x AAA Batteries
Size (mm) 133x144x38mm
Weight (g) 190
Flash guide number 15
Horizontal positions 0-20 Degrees
Manufacturer Link Metz
Back to top
Back to top
Back to top
Back to top
Product Code: 1541674-wex Manufacturers Part Number: Got a question? Get it answered...