The Nikon Wireless Remote Controller Set allows you to wirelessly control your Nikon camera from a distance. Much more than a simple shutter release, the kit allows you to also control such functions as the autofocus, video recording continuous and silent shooting, as well as featuring a programmable function button. With additional WR-R10 units you can even trigger multiple cameras at once. The kit is extremely useful for wildlife and studio photographers alike.Further Details
Both wireless remote controllers communicate with the camera at radio frequencies, providing an increased range of operation, and enabling communication even when there is no direct line of sight between devices. Using both devices provides an operating range of at least 20 meters. With two controllers, the range increases to 50 meters or more. You can use the WR-R10 transceiver and the WR-T10 transmitter together to trigger a single camera, or attach the WR-R10 transceivers to multiple camera bodies and capture the same moment from different perspectives. The WR-A10 Adapter is used to convert the ten-pin remote terminal of the camera to the new accessory terminal.
Back to top
- Photographers can use the WR-T10 to simultaneously release the shutter on multiple cameras that have a WR-R10 unit attached and have been paired with the WR-T10.
- Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location.
- Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).
- Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters).
- An unlimited number of cameras with a paired WR-R10 unit attached can be controlled by the WR-T10 unit.
- Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.
- Live View can be used with select D-SLRs released after the D4 (D4, D800/D800E, D600, D5200).
- When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units.