Teradek Bolt Pro 500 3G-SDI/HDMI Video Transceiver Set

5 To 7 Day Delivery

Free delivery also available - more info

£3,890.00

1x Teradek Bolt Pro 500 3G-SDI/HDMI Video Transceiver Set Sorry, there are no more available.

Please Login or Register to add to your Wish List.
Back to top
The Bolt Pro 500 3G-SDI Video Transceiver Set from Teradek contains both a transmitter and receiver. The models utilise highly-refined software, new wireless radios, and a redesigned chassis, making them incredibly reliable and capable. They feature metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection, USB 3.0 GRAB Engine, and more.

Key Features: Teradek Bolt Pro 500 3G-SDI/HDMI Video Transceiver Set

  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast Capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine
  • Longer Range
    Transmit visually lossless video up to 500ft with no delay.
  • 20MHz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before.
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range.
  • Built-In HDMI to SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.

What’s Included:

General:

  • 2 x HDMI Type A to Type A 12in Cable
  • 2 x SDI BNC to BNC 10in Cable

Transmitter:

  • 1 x 2-pin Lemo to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 Year Warranty

Receiver:

  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty
Back to top

Product Specification

Back to top
Back to top
Back to top
Back to top
Product Code: 1612175-wex Manufacturers Part Number: TER-BOLT-935 Got a question? Get it answered...