Upgrade Kits and Motor Drives

13 Matching Products Displaying Page 1 of 2

Sky-Watcher RA Economy Motor Drive for EQ2

Find out more about the Sky-Watcher RA Economy Motor Drive for EQ2

Can be fitted to any of the Sky-Watcher telescopes supplied with the EQ2 equatorial mount, provides single speed (1x sidereal) motor tracking of the R.A. Axis. Battery Powered.

In Stock
£29.00

1x Sky-Watcher RA Economy Motor Drive for EQ2

This item is already in your basket

Sky-Watcher RA Economy Motor Drive for EQ2

Sky-Watcher SkyScan PRO GOTO Upgrade Kit for Standard HEQ5 Mount

Find out more about the Sky-Watcher SkyScan PRO GOTO Upgrade Kit for Standard HEQ5 Mount

Available for easily upgrading the standard (non-PRO) HEQ5 mountings for computerised GO-TO capabilities. The kit consists of a V.3 SynScan Flash Upgradeable GO-TO handset, two Stepper Motors for DEC and R.A. Drives, a replacement Control Panel / Motor Board, a Hand Control Cable, Cable Clamp and Hand Control Holder. A 12v DV power supply is required,

In StockSave £34Free delivery available
£315.00RRP £349.00

1x Sky-Watcher SkyScan PRO GOTO Upgrade Kit for Standard HEQ5 Mount

This item is already in your basket

Sky-Watcher SkyScan PRO GOTO Upgrade Kit for Standard HEQ5 Mount

Buy used from £255.00
Sky-Watcher D.C. Single Axis Motor Drive for EQ-1 Mount
4.5

Find out more about the Sky-Watcher D.C. Single Axis Motor Drive for EQ-1 Mount

These economical single axis (R.A.) DC motor drives are designed to compensate for the earth's rotation. Their rotation speed matches the earth's rotation rate for stars to appear stationary in telescope eyepieces. With the 9-volt alkaline battery (included) installed, it lasts up to 40 hours.

In Stock
£29.99

1x Sky-Watcher D.C. Single Axis Motor Drive for EQ-1 Mount

This item is already in your basket

Sky-Watcher D.C. Single Axis Motor Drive for EQ-1 Mount

Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount

Find out more about the Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount

These dual axis motor drives, designed for EQ3-2 mounts, are essential in long-explosure astrophotography. They precisely control the telescopes' tracking speed to compensate for the earth's rotation during long exposure of celestial objects. Available in 2x, 4x, and 8x speeds through the Hand Controller. These DC motor drives run on 4 "D" cell batteries

In StockSave £9Free delivery available
£99.99RRP £109.00

1x Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount

This item is already in your basket

Sky-Watcher D.C. Dual-Axis Motor Drive for EQ3-2 Mount

Sky-Watcher D.C. Single Axis Motor Drive for EQ-2 Mount

Find out more about the Sky-Watcher D.C. Single Axis Motor Drive for EQ-2 Mount

These economical single axis (R.A.) DC motor drives are designed to compensate for the earth's rotation. Their rotation speed matches the earth's rotation rate for stars to appear stationary in telescope eyepieces. With the 9-volt alkaline battery (included) installed, it lasts up to 40 hours. Can be fitted to any of our telescopes supplied with the EQ2

In StockFree delivery available
£69.99

1x Sky-Watcher D.C. Single Axis Motor Drive for EQ-2 Mount

This item is already in your basket

Sky-Watcher D.C. Single Axis Motor Drive for EQ-2 Mount

Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ5 Mount
3.0

Find out more about the Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ5 Mount

Available for easily upgrading the standard (non-PRO) mountings for computerised GO-TO capabilities. Kits comprise V.3 SynScanTM Flash Upgradeable GO-TO handset, 2 x Stepper Motors for DEC and R.A. Drives, Replacement Control Panel / Motor Board, Hand Control Cable, Cable Clamp and Hand Control Holder (12V D.C. Power Supply required - not supplied).

In StockSave £20Free delivery available
£319.00RRP £339.00

1x Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ5 Mount

This item is already in your basket

Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ5 Mount

Sky-Watcher Dual-Axis Motor Drive for EQ-5 Mount
4.5

Find out more about the Sky-Watcher Dual-Axis Motor Drive for EQ-5 Mount

These dual axis motor drives, designed for EQ5 mounts, are essential in long-exposure astrophotography. They precisely control the telescopes' tracking speed to compensate for the earth's rotation during long exposure of celestial objects. Available in 2x, 4x, and 8x speeds through the Hand Controller. These DC motor drives run on 4 "D" cell batteries (not

Awaiting StockSave £15Free delivery available
£99.99RRP £115.00

1x Sky-Watcher Dual-Axis Motor Drive for EQ-5 Mount

This item is already in your basket

Sky-Watcher Dual-Axis Motor Drive for EQ-5 Mount

Sky-Watcher SynScan PRO GOTO Upgrade Kit for Standard EQ6 Mount

Find out more about the Sky-Watcher SynScan PRO GOTO Upgrade Kit for Standard EQ6 Mount

SynScanTM PRO GOTO UPGRADE KIT available for upgrading the STANDARD EQ6 mount.Available for easily upgrading the standard (non-PRO) mountings for computerised GO-TO capabilities. Kits comprise V.3 SynScanTM Flash Upgradeable GO-TO handset, 2 X Stepper Motors for DEC and R.A. Drives, Replacement Control Panel / Motor Board, Hand Control Cable, Hand Control,

Usually 5-7 DaysSave £17Free delivery available
£332.00RRP £349.00

1x Sky-Watcher SynScan PRO GOTO Upgrade Kit for Standard EQ6 Mount

This item is already in your basket

Sky-Watcher SynScan PRO GOTO Upgrade Kit for Standard EQ6 Mount

Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ3-2 Mount

Find out more about the Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ3-2 Mount

Easily upgrades the standard (non-PRO) mountings to a computerised GO-TO model. The kit consists of a V.3 SynScan Flash Upgradeable GO-TO handset, two Stepper Motors for DEC and R.A. Drives, a Replacement Control Panel / Motor Board, Hand Control Cable, Cable Clamp and Hand Control Holder (12v Power Supply required - not supplied).

Usually 5-7 DaysSave £30Free delivery available
£299.00RRP £329.00

1x Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ3-2 Mount

This item is already in your basket

Sky-Watcher SynScan GOTO Upgrade Kit for Standard EQ3-2 Mount

Sky-Watcher Single Axis D.C. Motor Drive for EQ3-2 Mount

Find out more about the Sky-Watcher Single Axis D.C. Motor Drive for EQ3-2 Mount

These single axis (R.A.) DC motor drives are powered by 4 "D" cell batteries (not included). A set of batteries will allow several nights of observing. 2x and 8x tracking speeds (2x and 4x for EQ1 model) are available through the hand controller. Motor, hand controller, and battery case are included.

Usually 5-7 DaysFree delivery available
£79.99

1x Sky-Watcher Single Axis D.C. Motor Drive for EQ3-2 Mount

This item is already in your basket

Sky-Watcher Single Axis D.C. Motor Drive for EQ3-2 Mount

Sky-Watcher Single-Axis Motor Drive for EQ-5 Mount

Find out more about the Sky-Watcher Single-Axis Motor Drive for EQ-5 Mount

These single axis (R.A.) DC motor drives are powered by 4 "D" cell batteries (not included). A set of batteries will allow several nights of observing. 2x and 8x tracking speeds are available through the hand controller. Motor, hand controller, and battery case are included.

Usually 5-7 DaysSave £10Free delivery available
£69.00RRP £79.99

1x Sky-Watcher Single-Axis Motor Drive for EQ-5 Mount

This item is already in your basket

Sky-Watcher Single-Axis Motor Drive for EQ-5 Mount

Celestron Omni-Series DA-CG4 Motor Drive

Find out more about the Celestron Omni-Series DA-CG4 Motor Drive

Whether you're getting into astrophotography, or simply looking to make you telescope easier to track and manoeuvre, dual-axis motor-drives such as this one are the perfect upgrade. Designed to function exclusively with Celestron's CG-4 Equatorial Mount, the motor drive can be utilised to track a star's motion for convenient viewing and long-exposure photography,

Usually 5-7 DaysFree delivery available
£159.00

1x Celestron Omni-Series DA-CG4 Motor Drive

This item is already in your basket

Celestron Omni-Series DA-CG4 Motor Drive