The Canon EFT-E6 Wireless File Transmitter has been designed to work with the Canon EOS 1D X and offers the ability to wirelessly transmit images from your camera to a computer. The new WFT-E6 unit takes the WiFi possibilities with the EOS-1D X to a new level by offering advantages such as 802.11a/b/g and n compatibility, DLNA compliance, FTP, EOS Utility and WFT Server shooting, as well as Linked Shooting for remote shutter triggering of other WiFi-enabled EOS-1D X cameras. With the use of the WFT-E6's built-in WFT Server the EOS-1D X can be controlled wirelessly over an HTTP connection using a web browser. This means you can see what your camera sees and control the settings and shooting functions through a web browser (or a device like a smart phone or tablet). You can also browse and download captured images.
Key features of the Canon WFT-E6 Transmitter
- IEEE 802.11a, 802.11b, 802.11g and 802.11n compatibility
- Linked shooting
- Digital Living Network Alliance (DNLA) compatible
- WFT Server shooting
- EOS Utility Mode
- Built-in Bluetooth transceiver
- Wireless Time Syncing
- WiFi Protected Setup (WPS)
- Internal antenna with range of approximately 150 metres
- Dust and drip-proof construction to match the EOS-1D X
- Smaller, lighter and more compact than previous WFT units
Who is it for?
Great for sports and news photographers the WFT-E6 unit will allow rapid transfer of images to an access point and out to a picture desk. However, It is not just for news and sports photographers as studio photographers will enjoy the ability to see previews of their images on a large screen by transmitting JPEGs to their computer. Travel, landscape and wildlife photographers will like the built-in Bluetooth compatibility that allows them to use a Bluetooth connection to a GPS device for geo-tagging, and those photographers who like experimenting with technology to push the boundaries of what is possible will find the linked shooting and advanced WFT Server modes especially appealing.
The WFT-E6 transmitter offers high-speed wireless file transfer via three transmission modes for connection to other devices. FTP is used to transfer images to an FTP server. EOS Utility mode allows two-way communication between the camera and a computer (as if they were connected by a LAN or USB cable), and WFT Server mode allows a web browser to view images stored on the memory card.
Continuing the capability first available in Canon’s EOS 7D DSLR, the WFT-E6 offers the ability to remotely trigger other EOS-1D X cameras fitted with WFT-E6 units. This means that a master camera fitted with a WFT-E6 can control up to 10 slave cameras that are also fitted with WFT-E6, WFT-E2 II, WFT-E4 II or WFT-E5 units – they can be triggered from the master camera from up to 100 metres away. In this way, you can capture an image of a subject from several different viewpoints at the same time. The lag between triggering the master camera and the slave cameras firing is around 0.05sec, and is the same whether the master camera is positioned 1m or 100m from the slave cameras.
A new development for WFT server functions is Linkage with WFT Server. This combines the benefits of both Linked shooting and WFT Server, so that each of the remote linked cameras can be browsed independently and have their settings changed. Equally, if the master camera is triggered over WFT Server all of the linked slave cameras will trigger as well.
To help to conserve the battery life of the EOS-1D X, the WFT-E6 features a power-saving option. If ‘LAN power save’ is set to ‘Enable’ in the camera menu, the WFT-E6 will complete any remaining image transfers, log off the remote FTP server and then set itself into a sleep state. This stops the connection remaining active needlessly and wasting battery power.
In a first for the EOS range and WFT units, the WFT-E6 has built-in Bluetooth functionality so that, instead of using a Bluetooth dongle with the WFT unit, the WFT-E6 unit can communicate directly with a Bluetooth GPS device to allow automatic geo-tagging of images within the EXIF data.
Because the EOS-1D X has its own built-in RJ-45 LAN connector, the WFT-E6 doesn’t need another one – this means the unit is smaller and lighter than any previous Canon Wireless File Transmitter.
There are several wireless standards for data transmission over wireless networks. By incorporating the 802.11a standard Canon has ensured that the WFT-E6 unit is compatible with a wide range of standards. The 802.11a network operates on a frequency of 5GHz, which is an un-crowded band and is less affected by radio wave interference making transfer rates more stable.
By contrast, 802.11b and 802.11g networks can be affected by interference from Bluetooth devices, cordless telephones, microwave ovens and other devices operating in the 2.4GHz band which can make transfer rates unstable. 802.11n is the fastest of the standards and enables transfer speeds about three times faster than 802.11a. This makes it possible to transfer large files wirelessly without having to wait a long time. The maximum link speed through an 802.11n connection with the WFT-E6 is around 150Mbps, while the transfer speed is around 60Mbps. Equally, like 802.11a, 802.11n is much less susceptible to radio frequency interference.
Back to top
Many consumer electronics devices are compatible with the Digital Living Network Alliance (DNLA). These include items such as many of the latest generation of game consoles as well as some recent televisions and digital photo frames. After establishing a connection between the DLNA device and the WFT-E6, JPEG images stored on the camera can be viewed on the remote device.