A seamless blend of functionality, lighting integration, durability and waterproof integrity, the Ikelite Underwater Housing for Panasonic Lumix GH3 and GH4 cameras offers access to all the important camera functions except for the diopter adjustment control, rear control dial, or mode dial lock (GH4 only). Mode dial must be un-locked prior to installation for use underwater (GH4 only). The housing includes a balanced aluminium tray with quick release handles for easy attachment and removal of external lighting. An aluminium 1/4-20 threaded top mount provides an additional attachment point for lightweight accessories. A compatible Lens Port is required for waterproof operation. Port not included.
The true TTL advantage
Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.
Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.
Exposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.
An over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.
This housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1/4-20 threaded top mount provides an additional attachment point for lightweight accessories.
Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
- AF35: no
- DS50: yes, above serial number 70000
- DS51: yes
- DS125: yes, above serial number 5000
- DS160, DS161: yes
- DS200: yes
- Non-Ikelite: yes, manual flash exposure only
- Tray with dual quick release handles
- Port hole cover
- Waterproof bulkhead cap
- 5509.27 Universal zoom set up to 2.8-inch diameter
- 5509.28 Universal zoom set 2.8 to 3.0-inch diameter
- Silicone lubricant 1cc tube
- Micro-fiber lens cloth
Back to top
- 200 ft (60m) depth rating
- All important camera functions are accessible
- Controls are not provided for Diopter Adjustment Control, Rear Control Dial, or Mode Dial Lock (GH4 only). Mode Dial must be un-locked prior to installation for use underwater (GH4 only).
- Ikelite bulkhead connector with built-in TTL circuitry
- Slightly negative buoyancy in fresh water
- Actual buoyancy varies depending on choice of lens and port
- Weight 5.4 lb (2.4 kg) not including tray + handles
- Dimensions 9.8 x 6.9 x 6.5 in (25 x 17 x 16 cm) including projections
Back to top
|For Use With
||Panasonic Lumix GH3, GH4
||250 x 170 x 160 mm
Buy Now Pay Later
With our no deposit Buy Now Pay Later option, pay nothing for six months when you spend £250 or more, then either settle the cash price in full by paying a £29.00 settlement fee, or choose to spread the cost over 36 months at 19.9% APR Representative. Please see the repayment example below to see how much purchasing this item on finance would cost.
|Item Value (Cash Price)
|Total Amount Credit
||35 x £62.64
|Total Amount Payable
|Annual Rate of Interest
Are you eligible for finance?
Applicants must be:
- Aged 18 years or older from the application date
- In permanent UK residence for a minimum of three years
- Fulfil at least one of the following employment criteria:
- In regular, permanent employment.
- Retired from regular employment - With a minimum age of 50.
- Not working through disability.
Note: All applicants will be subject to a credit reference check by the lender.
Credit is subject to application and status. Warehouse Express Ltd trading as Wex Photographic act as credit broker and not the lender. Barclays Partner Finance act as the lender.
Can I repay early? If so how?
No repayments are scheduled in the initial six-month deferral period. However, it is possible to pay off the loan, either by way of a lump sum or in smaller amounts. If the loan is fully repaid within the six-month deferral period, then no interest is payable, but a £29.00 early-settlement will be incurred. Such repayments may be made to Barclays Partner Finance by cheque, debit card or standing order. Unfortunately it is not possible to set up a direct debit within the deferral period. Further information on how to make such repayments will be set out in the loan agreement pack provided by Barclays Partner Finance.
What happens if I don't repay within the first six months (deferral period)?
Following the six month deferral period, Barclays Partner Finance will initiate a monthly direct debit payment for the remaining duration of the loan. Interest will be charged at a rate of 19.9% APR on outstanding balances (backdated to the first date of the loan). Late payment penalties and early repayment charges will apply from this point. Barclays Partner Finance will send a reminder letter approximately one month before the six month deferral period is due to elapse. Note: If you chose to spread the cost and pay monthly, interest is charged from the start of the loan, not from the start of the repayment period.
What will I receive from the finance provider (lender)?
Barclays Partner Finance will send a loan agreement pack approximately four weeks after delivery of the goods, confirming that the account has been activated and, from this point, it is possible to make repayments against the loan.
For further information on how our finance product work, see our Finance help section.
Back to top
† Once your application has been accepted, usually within minutes, we will immediately dispatch your equipment.