This 12 pack of Visible Dust Green Swabs for 1.0x sensors are specially tailored for cleaning the delicate DSLR sensor without leaving streaks, pooling or scratches. For use with the 1.0x sensor size range. Please visit the Visible Dust Sensor Chart to find out what size sensor swabs you need.
The Dust-Aid Platinum Sensor Cleaning Kit is a highly effective tool for removing dry dust from any Digital SLR Sensor. Dust-Aid Platinum contains a cleaning wand together with 6 cleaning strips, a storage case and easy to follow comprehensive instructions. Dust-Aid uses a silicone based, low-tack pad to carefully lift dust off the sensor and out of the
The recommended way to clean your DSLR sensor from any manufacturer, if only because of its relative safety in use, the hand blower has made it's way into every professional photographers Photo-Bag. The VisibleDust Hurricane Blower delicately directs a current of air to remove dust from the chamber area, lenses, and other delicate surfaces.
The Visible Dust Quasar Plus Sensor Loupe is a unique tool that can be used to identify the smallest of spots on the sensor. The Plus is an improvement on the Sensor Loupe 7x with an improved focusing system and 52mm metal ring which allows the use of filters and close-up lenses for higher contrast and magnification. The Bright Vue technology used in Quasar
Purple Adapter for Sensor Brush SD
The is the Visible Dust Green Adapter for use with the Sensor Brush SD (spinning device).
The Zeeion Blower from Visible Dust is an anti-static non-contact dust removal device for DSLR cameras. Where ordinary blowers are made from rubber which increases static charges, Zeeion is made from Silicon-RX - a unique compound with an anti-static property. When squeezed, the air emitted is negatively charged - it neutralises the positive charge on the
Sensor Swabs Type 3 are designed for cleaning CCD/CMOS chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Recommended by Eastman Kodak Company for cleaning the DCS family of digital cameras and by Fujifilm for the S1Pro and S2 Pro. Sensor Swabs
Sensor Clean has many characteristics that make it an excellent choice for cleaning your sensor. While it is best used on water based stains and light dust contamination, it also provides excellent dust repellent properties and anti-fogging capabilities. Sensor Clean works best with VisibleDust Green Series Swabs.
Find out more about the Visible Dust EZ Cleaning Kit Plus - 1.15ml VDust Sensor Brush and 5 Orange Swabs (1.0x)
The Visible Dust EZ Sensor Cleaning Kit Plus includes 1.15ml of VDust Plus fluid, a sensor cleaning brush and 5 Orange 1.0x (24mm) DHAP Super Soft Fabric Sensor Cleaning Swabs. If you are unsure as to the nature of your stain or you get both water and lubricant stains, VDust Plus will fit the bill perfectly. Designed to clean away water and most oil stains,
If you have a stubborn stain on your sensor that won't go away than Smear Away is your answer. Specially formulated to protect your sensor as it cleans away oil and grit, Smear Away also provides an anti-static barrier to reduce further contamination. It is recommended to use Smear Away with VisibleDust DXM-100 (green) Sensor Swabs.
The Visible Dust Arctic Butterfly 724 (Super Bright) is an upgraded version of the classic 724 Sensor Cleaning brush.The built in LED can be used to illuminate the sensor and make dust locating an easier task, as well as reducing the possibility of fibres being dragged accidentally against the surrounding cavity. This in turn reduces smearing of the sensor