The Interfit Pro Snoot sheds a harder and slightly narrower beam of light than a honeycomb. Snoots are ideally suited for tighter control of hair-lights in portrait or fashion work, or can be used in product photography to provide a pool of light. PLEASE NOTE: Not to be used with modelling lamps over 250w or Tungsten or Halogen lights. The modelling lamp
For use on B1 and B2 heads only. A small, lightweight snoot for use with the B2 off camera flash head. The snoot tightens the light pool down to a much smaller area, which is ideal for creating dramatic portraits or highlighting discrete areas of the composition.
A set of 3 honeycomb grids, designed for use with the Elinchrom Snoot, that further narrow the light output from the snoot, to give a soft edged spot of differing sizes. They are easy to retro fit, with clips to grip the interior of the snoot. N.B. The Grids necessarily restrict ventilation of the Snoot. Please monitor heat level at all times. High wattage
The Elinchrom Snoot and Snoot Grid Set is a great accessory kit for producing small, tight, areas of light. The snoot on its own will give a small hard edged circle and you can add the grid for a smaller but softer effect. Ideal for extreme light control on small areas of your subject to bring up detail and decrease the highlight-to-shadow ratio. NOTE the
Tighten, control and colour your light with this economical and effective snoot and gel set from Phottix. Compatible with S-Type (Bowens style) light mounts - including the Phottix Indra500 TTL - the set includes a snoot, removable honeycomb grid and five gels: Red, Yellow, Blue, Green and Opaque.
This Interfit INT212 snoot is specifically made for the EX and EXD family of products. Snoots create a tight circle of light. The snoot comes complete with a removable honeycomb grid and colour gel set with red, green, yellow and blue gels.
The Bowens S-Type Snoot is a key studio accessory that can create small pools of controlled light. Use the Snoot for hair lighting, effect lighting and especially low key portrait lighting. This Snoot comes into its own when used with the optional 1/4in Honeycomb Grid. NOTE the modelling lamp should not be left on when using a snoot/honeycomb/gels.
Designed for use with the Elinchrom Snoot this honeycomb grid attachment simply clips into place to give an even more controlled concentrated light source. Please note the Grid will restrict ventilation of the Snoot. Please monitor heat level at all times. High wattage tungsten lamps or high power multiflashing are liable to cause overheating.
The Bowens Universal Spot Attachment is designed for use with Gobos and all Bowens heads with an 'S-Type' bayonet fitting. This unique light-head attachment features a high-quality optical system that allows the projection of gobos, patterns and cut-outs on the background or onto the subject. It can also be used as a focusing spot to light specific parts
A standard snoot reflector designed for Lastolite Lumen8 flash heads utilising an S-Type bayonet fitting. Supplied with grid for more concetrated directional light. NOTE the modelling lamp should not be left on when using a snoot/honeycomb/gels.
This Metz Snoot Kit is tailored to fit Metz or other branded lighting units fitted with an 18cm reflector. A snoot results in a narrow and highly controllable light source. Further effects can be obtained by utilising the included honeycomb grid and four coloured filters.
The Interfit Stellar Snoot sheds a harder and slightly narrower beam of light than a honeycomb. Snoots are ideally suited for tighter control of hair-lights in portrait or fashion work, or can be used in product photography to provide a pool of light. PLEASE NOTE: Not to be used with modelling lamps over 250w or Tungsten or Halogen lights. The modelling